Smart Lock Firmware Version: 3.5
1. The battery level indication has been improved to provide more accurate readings.
This update applies to the following firmware versions and above:
(MCU 3.5, BLE 2.2, Wi-Fi Bridge 1.7).
Smart Lock Firmware Version: 3.4
1. Fixed (removed) an issue where the Internal Forced Lock function was activated when an authenticated card was presented during the automatic locking process.
——————————————————————
Smart Lock Firmware Version: 3.2 and 3.3
1. Enhanced segmentation of reset and factory reset operations.
2. Revised protocols related to history records.
——————————————————————
Smart Lock Firmware Version: 3.1
1. Forced Lock Function Updated
① Internal Forced Lock: When enabled, all authentication attempts are denied. An authentication release procedure is required to unlock.
② External Forced Lock: When enabled, only App authentication (Unlock via App) and the Inner Body Open/Close button authentication will
be denied.
2. Added TRX Internal Authentication
① When set directly on the Smart Lock device, this option can be turned ON or OFF only when the RX module is connected.
② When set via the App, the OFF option is always available.
③ When set via the App, the ON option is available only when the RX module is connected.
——————————————————————
Smart Lock Firmware Version: 2.9
1. Firmware release for the S520 series.
——————————————————————
Smart Lock Firmware Version: 2.8
1. Bug fix for the TRX100 module in 5 Series models. (Fixed the bug where the TX signal was transmitted when pressing the Open/Close button on the main body.)
——————————————————————
Smart Lock Firmware Version: 2.7
1. The Auto-Lock status will be checked when the door is closed, improving overall functionality.
——————————————————————
Smart Lock Firmware Version: 2.6
1. The issue where the Auto-Lock function of the smart lock is delayed in certain situations after the door is closed will be improved.
2. When the smart lock is Factory Reset, the connection to the server will be disconnected (same effect as deleting the smart lock from the app).
——————————————————————
Smart Lock Firmware Version: 2.5
1. The issue of unstable communication in some models (5 series and 7 series) that support TRX100 has been improved.
——————————————————————
Smart Lock Firmware Version: 2.4
1. The conditions and errors for voice output on some models will be fixed.
2. During internal forced lock settings, external forced lock settings will not be allowed.
3. During external forced lock settings, internal forced lock settings will not be allowed.
4. TRX100 modules are available for 5 Series models (500, 501, 510, etc.).
• TRX100 was previously only used with 7 series models, but it is now also available for use with 5 series models.